International Journal of Oral & Maxillofacial Surgery
Volume 39, Issue 5 , Pages 457-462 , May 2010

Virtual occlusion in planning orthognathic surgical procedures

  • N. Nadjmi

      Affiliations

    • Cranio-Maxillofacial Unit, Eeuwfeestkliniek, Antwerp, Belgium
    • Corresponding Author InformationAddress: Nasser Nadjmi, Cranio-Maxillofacial Unit, Eeuwfeestkliniek, Harmoniestraat 68, B-2018 Antwerp, Belgium. Tel.: +32 3 240 26 11; fax: +32 3 238 04 89.
    • ,
  • W. Mollemans

      Affiliations

    • Medical Image Computing, Faculties of Medicine and Engineering, University Hospital Gasthuisberg, Leuven, Belgium
    • ,
  • A. Daelemans

      Affiliations

    • Cranio-Maxillofacial Unit, Eeuwfeestkliniek, Antwerp, Belgium
    • ,
  • G. Van Hemelen

      Affiliations

    • Cranio-Maxillofacial Unit, Eeuwfeestkliniek, Antwerp, Belgium
    • ,
  • F. Schutyser

      Affiliations

    • Medical Image Computing, Faculties of Medicine and Engineering, University Hospital Gasthuisberg, Leuven, Belgium
    • ,
  • S. Bergé

      Affiliations

    • Department of Oral and Maxillofacial Surgery, Radboud University Nijmegen, Medical Centre, Nijmegen, The Netherlands

,Accepted 1 February 2010.

References 

  1. Bell WH, Guerrero CA. Distraction Osteogenesis of the Facial Skeleton. BC Decker Inc.; 2007;pp. 55–79
  2. Bettega G, Payan Y, Mollard B, Boyer A, Raphaël B, Lavallee S. A simulator for maxillofacial surgery integrating 3D cephalometry and orthodontia. Comput Aided Surg. 2000;5:156–165
  3. Burk DL, Mears DC, Cooperstein LA, Herman GT, Udupa JK. Three-dimensional computed tomographic imaging and interactive surgical planning. J Comput Tomogr. 1986;10:1–10
  4. Chabanas M, Luboz V, Payan Y. Patient specific finite element model of the face soft tissues for computer-assisted maxillofacial surgery. Med Image Anal. 2003;7:131–151
  5. Chapuis J, Schramm A, Pappas I, Hallermann W, Schwenzer-Zimmerer K, Langlotz F, et al. A new system for computer-aided preoperative planning and intraoperative navigation during corrective jaw surgery. IEEE Trans Inform Technol Biomed. 2006;11:274–287
  6. Gateno J, Teichgraeber JF, Xia J. Method and apparatus for fabricating orthognathic surgical splints (US patent no. 6,671,539), in USPTO Patent Full-Text and Image Database. December 30, 2003, US Patent and Trademark Office.
  7. Gateno J, Xia J, Teichgraeber JF, Rosen A. A new technique for the creation of a computerized composite skull model. J Oral Maxillofac Surg. 2003;61:222–227
  8. Gateno J, Xia J, Teichgraeber JF, Rosen A, Hultgren B, Vadnais T. The precision of computer-generated surgical splints. J Oral Maxillofac Surg. 2003;61:814–817
  9. Lorensen WE, Cline HE. Marching cubes: a high resolution 3D surface construction algorithm. In: Proc of SIGGRAPH. 1987;p. 163–169
  10. Maes F, Collignon A, Vandermeulen D, Marchal G, Suetens P. Multimodality image registration by maximization of mutual information. IEEE Trans Med Imaging. 1997;16:187–198
  11. Meehan M, Teschner M, Girod S. Three-dimensional simulation and prediction of craniofacial surgery. Orthodont Craniofacial Res. 2003;6(Suppl. 1):102–107
  12. Mollemans W, Schutyser F, Nadjmi N, Maes F, Suetens P. Predicting soft tissue deformations for a maxillofacial surgery planning system: from computational strategies to a complete clinical validation. Med Image Anal. 2007;11:282–301
  13. Nkenke E, Zachow S, Benz M, Maier T, Veit K, Kramer M, et al. Fusion of computed tomography data and optical 3d images of the dentition for streak artefact correction in the simulation of orthognathic surgery. Dentomaxillofac Radiol. 2004;33:226–232
  14. Pongracz F, Bardosi Z. Dentition planning with image-based occlusion analysis. Int J CARS. 2006;1:149–156
  15. Schutyser F, Van Cleynenbreugel J, Ferrant M, Schoenaers J, Suetens P. Image-based 3D planning of maxillofacial distraction procedures including soft tissue implications. Lecture Notes Computer Sci (MICCAI). 2000;1935:999–1007
  16. Swennen G, Schutyser F, Hausamen JE. Three-DimensionalCephalometry. A colour Atlas and Manual. Springer; 2005;7-32
  17. Swennen G, Mommaerts M, Abeloos J, Clercq CD, Lamoral P, Neyt N, et al. The use of a wax bite wafer and a double computed tomography scan procedure to obtain a three-dimensional augmented virtual skull model. J Craniofac Surg. 2007;18:533–539
  18. Swennen G, Mollemans W, De Clerq C, Abeloos J, Lamoral P, Lippens F, et al. A cone-beam computed tomography triple scan procedure to obtain a three-dimensional augmented virtual skull model appropriate for orthognathic surgery planning. J Craniofac Surg. 2009;20:297–307
  19. Troulis MJ, Everett P, Seldin EB, Kikinis R, Kaban LB. Development of a three dimensional treatment planning system based on computed tomographic data. Int J Oral Maxillofac Surg. 2007;31:349–357
  20. Westermark A, Zachow S, Eppley B. Three-dimensional osteotomy planning in maxillofacial surgery including soft tissue prediction. J Craniofac Surg. 2005;16:100–104
  21. Xia J, Samman N, Yeung RW, Shen SG, Wang D, Ip HH, et al. Three-dimensional virtual reality surgical planning and simulation workbench for orthognathic surgery. Int J Adult Orthodon Orthognath Surg. 2000;15:265–282
  22. Xia JJ, Gateno J, Teichgraeber JF. Three-dimensional computer-aided surgical simulation for maxillofacial surgery. Atlas Oral Maxillofac Surg Clin North Am. 2005;13:25–39
  23. Zachow S, Hege H, Deuflhard P. Computer assisted planning in cranio-maxillofacial surgery. J Comput Inform Technol–Special Issue on Computer-Based Craniofac Model Reconstruct. 2006;14:53–64

PII: S0901-5027(10)00045-7

doi: 10.1016/j.ijom.2010.02.002

International Journal of Oral & Maxillofacial Surgery
Volume 39, Issue 5 , Pages 457-462 , May 2010

Article Tools

* Image Usage & Resolution